ODIN - Inject Firmware / Rom To Android
1) Download file - Odin 3.09
2) Download your firmware from here.(You have to join to download the firmware.)
3) Unzip the Odin and Firmware file.
4) Open Odin 3.09.
5) "Auto Reboot" & "F.Reset Time" should be ticked and others unticked.
6) Click on AP and select the firmware file with ".tar" extension. A process will be started in Message box.
7) You should have "Device Driver Installed". You can use Kies for installing drivers.
8) Power off the phone completely by removing its battery for 5 seconds.
9) Re-insert the battery back into its place.
10) Press and hold Volume Down, Home and Power buttons, all at the same time.
11) Release the buttons only when the ‘Warning!!’ message appears.
12) Next, press Volume Up button to confirm that you wish to enter Download Mode.
13) Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
14) Now you can connect your device with your PC using original device's USB cable.
15) You will see a message in Message box of Odin "Added!".
16) Now click on "Start".
17) The process will be started.
18) Don't take off the device still you see a "Success" message on the first box up to ID:Com .
2) Download your firmware from here.(You have to join to download the firmware.)
3) Unzip the Odin and Firmware file.
4) Open Odin 3.09.
5) "Auto Reboot" & "F.Reset Time" should be ticked and others unticked.
6) Click on AP and select the firmware file with ".tar" extension. A process will be started in Message box.
7) You should have "Device Driver Installed". You can use Kies for installing drivers.
8) Power off the phone completely by removing its battery for 5 seconds.
9) Re-insert the battery back into its place.
10) Press and hold Volume Down, Home and Power buttons, all at the same time.
11) Release the buttons only when the ‘Warning!!’ message appears.
12) Next, press Volume Up button to confirm that you wish to enter Download Mode.
13) Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
14) Now you can connect your device with your PC using original device's USB cable.
15) You will see a message in Message box of Odin "Added!".
16) Now click on "Start".
17) The process will be started.
18) Don't take off the device still you see a "Success" message on the first box up to ID:Com .
Note: Please be patience, this process would take time and its very risky
process. This can also hard brick your phone. Wait till your phone gets
restarted and all processes are done. Be Patience !
Comments
Post a Comment